MiniPack HFFS Machine | MDC Engineering, Inc.

MiniPack HFFS Machine

Compact Horizontal Form Fill Seal Machine.
Ideal for Medical device, consumer product, and pharmaceutical packaging.

MiniPack HFFS

Features


  • Space saving footprint
  • Deep draw blisters
  • Flexible, semi-rigid, rigid forming film
  • Affordable entry to high quality packaging
  • High or low volume runs
  • Simple tool change
  • Easy to operate, manual or auto cycles
  • Clear view of mechanisms

  • Technical Data


  • Max Web width: 12.6″ (320mm)
  • Max Index length: 12.0″ (305mm)
  • Max Package Draw Depth: 4.0″ (102mm)
  • Max Film Thickness: Up to 20mil
  • Max Film Roll Dia: 16.0″ (406mm)

  • Overall Dimensions


  • 12″ Max Index 161″ L x 36″ W x 76″ H (4100mm x 914mm x 1930mm)
  • 8″ Max Index 134″ L x 36″ W x 76″ H (3400mm x 914mm x 1930mm)
  • 6″ Max Index 118″ L x 36″ W x 76″ H (3000mm x 914mm x 1930mm)

  • Basic Functions Avaliable Functions
    Frame Construction: Extruded aluminum frame with clear viewing
    Film Advance: M-style film gripper, precise servo indexing
    Forming Film Unwind: Constant tension dancer/brake system, Powered unwind
    3″ core x 16″ OD roll Web break alarm
    Low roll warning
    Splice detection
    Forming Station: Vacuum heat, vacuum form Contact preheat with upper and lower heat
    Male plug assist
    Male plug with vent seam
    Loading Area: Minimum 2 FT span for loading Customer specific load area
    Knee free load area
    Top Film Unwind: Constant tension dancer/brake system, Powered unwind
    3″ core x 16″ OD roll Web break alarm
    Low roll warning
    Splice detection
    Printing: Available top or bottom printing as option Pre-printed film registration system
    Online thermal, flexigraph or digital color printing
    Sealing Station: Retractable upper heat plate Electronic seal pressure regulation, recipe controlled
    Profiled contact seal plate Seal force monitoring with load cell and alarms
    Seal pressure regulation Dwell time monitoring system
    One piece seal gasket Gridded or smooth gasket, various durometer
    After Seal Cooling: Depending application and films Upper stationary cooling plate with lower seal clamp
    Cross Machine Cutting (XMD): Cross cut knife Matched metal punch for complete perimeter cutting (semi-rigid/rigid)
    Machine Direction Cutting (MD): Crush cut blade/anvil system (squeeze knives) Matched metal punch for complete perimeter cutting
    Electrical: 208-240VAC, 3phase, 60 Hz 460VAC, 3phase, 60Hz
    400VAC, 3phase, 50/60Hz
    Other voltages available upon request
    Compressed Air: 15 SCFM @ 90 PSI Electric servo mechanisms available upon request
    Cooling Water: House water Optional chiller
    Controls: Allen-Bradley controls: Other control systems available on request.
    CompactLogix PLC International control system with Delta Automation
    Kinetix servo drive PLC, HMI and servo system readily available.
    10″ PanelView Plus color touchscreen
    Ethernet IP network
    PID heat controls
    Shaft angle based operation and recipe based controls
    Safety: Cat 3 safety, complete and interlocked guarding